• American Seals & Packing
  • O-Rings Accessories
  • Aflas O-Rings
  • Kalrez O-Rings
  • Mechanical Seals
 
     
    Flourosilic O-Rings

    Fluorosilicone O-Rings

    O-Rings made of Fluorosilicone are generally used in chemical applications. When Silicone O-Rings are prefered for their softness (generally a 50 durometer) but won't hold up to chemicals, fluorosilicone is often the answer.


    Flourosilic O-Rings Description:

    Fluorosilicone is the common name for fluorovinylmethyl silicone rubber. Fluorosilicones combine the best properties of fluorocarbons and silicones. Fluorosilicones resist solvents, fuel, and oil (similar to fluorocarbons).

    They also have high and low temperature stability (as with silicones). Fluorosilicones are resilient, with low compression set characteristics. Though widely used in aerospace fuel systems and auto fuel emission controls, fluorosilicones are really only good as static seals. High friction tendencies, limited strength, and poor abrasion resistance disqualify them from dynamic uses.

    Flourosilic O-Rings

    Flourosilic O-Rings

     

    Buy

    Flourosilic O-Rings Properties:

    Poor Wear Resistance, Moderate Comp. Set Resistance, Moderate Short-Term Resilience, Poor Permeation Resistance

    Flourosilic O-Rings Temperature Range:

    -80ºF to 450ºF

    Flourosilic O-Rings Recommended For:

    Jet Fuel, Dry Heat, Wide Temperature Range, Some Petroleum Oils, Chlorinated Solvents

    Flourosilic O-Rings NOT recommended For:

    Ketones (MEK), Phosphate Esters, Some Acids, Auto / Aircraft Brake Fluids, Amines (Ammonia)

     
    • O-Rings Kits
    • PTFE O-Rings
    • Nitrile O-Rings
    • Viton O-Rings
    • Silicone O-Rings
    • Viton O-Rings
    • O-Rings Kits Tools
    • O-Rings Kits
    • PTFE O-Rings
    • Nitrile O-Rings
    • Viton O-Rings
    • Silicone O-Rings
    • Viton O-Rings
    • O-Rings Kits Tools
     
    Aflas O-rings

    Aflas O-rings

     

    O-rings made of Aflas are generally utillized in chemical and high temperature applications.Aflas® material is an elastomeric based..

    Read More

    BUNA O-RINGS

    Buna O-rings

     

    Buna O-rings are the most common o-rings on the market. Ideal for water or hydrocarbons (Oil & Gas), they area staple in the industry.

    Read More

    EPDM O-Rings

    EPDM O-rings

     

    EPDM O-rings are a lower cost o-ring that performs well in a number of applications. EPDM is used to seal car windows,..

    Read More

    O-Ring Kits

    O-Ring Kits

     

    The most common AS-568 American standard sizes are contained in this o-ring kit. 27/ 30 / 32 different sizes Kits are availble.

    Read More